408-754-4176 | info@reachtech.com

by Reach Technology, a Novanta Company
PoE Test Equipment for Electronic Equipment Manufacturers > PoE3N Power-over-Ethernet (IEEE 802.3af/at) Tester

PoE3N Power-over-Ethernet (IEEE 802.3af/at) Tester

The PoE3N provides diagnostic functional testing of 24 PSE ports compatible with IEEE Standards 802.3af and 802.3at. It can draw up to 720mA per port while passing gigabit traffic. It provides high density with 24 Powered Device (PD) loads in a 1U high chassis. The PoE3NL/8 has eight instead of 24 ports but is otherwise the same as the PoE3N.

Each PoE section has a “UUT” and a “REF” port. The UUT port is connected to the PSE and acts as a PD load to that port. The UUT data path is connected via power-isolating magnetics to the REF port. In this way, an external data bit error tester or PSE test functionality can be used to test data integrity while the power load is enabled.

Specification Highlights

  • Flexible IEEE signature options: low, nominal, high, over-spec capacitive.
  • Classification including margins.
  • Passes GbE traffic from UUT to REF port isolated from PD load.
  • Relay data path for compatibility with Phy-based cable diagnostics.
  • Low cost compared to compliance-level PD emulators.
  • Universal voltage (110/220) power supply.
  • Serial RS232 console control.

Pricing and Availability